How to create a live stream over Starlink
Starlink brings internet to places where there is no cable or stable mobile coverage. Together with rtsp.me this means you can run a live stream from almost any point on the map.
We have tested streaming over Starlink — everything works. The only peculiarity is that Starlink does not provide a static IP, so the camera is connected by one of the methods that do not need one: RTMP Push, a software agent, the Bridge device or a ready-made camera with an ID.
Go to rtsp.meWhy stream over Starlink
- Anywhere in the worldA stream can be started wherever Starlink service is available — far from cities, cables and cell towers
- Tested in practiceWe have checked streaming to rtsp.me over Starlink: the stream starts and runs stably
- No static IPThe connection is outbound, so a public address, DDNS and port mapping are not required
- Quick launchSet up the dish, plug in the camera and add the stream in your account
- Familiar viewingViewers watch the stream in a browser on a website, just like with wired internet
Where it is useful
- construction sites and remote facilities without wired internet;
- farms, greenhouses and agricultural land;
- campgrounds, fishing lodges and mountain resorts;
- marinas, beaches and weather cameras in hard-to-reach places;
- temporary sites, events and expeditions.
Why an ordinary RTSP link does not work
In the classic setup the service connects to the camera itself, which requires a static public IP and port mapping on the router. A standard Starlink connection has no static IP and works through CGNAT: the camera cannot be reached from the internet, and opening ports on the router does not help.
The solution is to reverse the direction: the camera, program or device connects to the server itself over an outbound connection. This works over Starlink without any additional settings.
Method 1. Camera with RTMP Push
If the camera supports RTMP Push, it sends the stream to the server itself. Switch the RTMP Push toggle on in the stream settings on rtsp.me, copy the personal publishing link and paste it into the camera settings.
If the connection drops, the camera restores the stream by itself. The step-by-step setup is described on the “RTMP Push without a static IP” page.
Method 2. Software agent
For ordinary RTSP cameras without RTMP Push, install the free rtsp.me software agent on a computer or mini PC in the same local network. The agent picks up the camera's RTSP stream locally and sends it to the server over an outbound connection.
Installation and setup are described on the “Software agent for streaming from an IP camera without a static IP” page.
Method 3. Bridge
Bridge is a small device that is plugged into the local network next to the cameras. It needs no configuration and lets you connect up to eight already installed RTSP cameras without a computer on site.
More about the device on the “Our streaming equipment” page.
Method 4. Ready-made camera with an ID
If there are no cameras on the site yet, the easiest option is our ready-made camera: plug it into the Starlink router's network and use the details from the card in the box. No camera or router configuration is required.
Camera specifications on the “Our streaming equipment” page.
Which method to choose
- RTMP PushYou have, or are ready to buy, a camera with RTMP Push support
- Software agentThe camera only speaks RTSP and there is a computer or mini PC nearby
- BridgeThe cameras are already installed and only speak RTSP — nothing needs replacing
- Ready-made cameraThe site is being equipped from scratch
A detailed description of all four methods is on the “How to create a live stream without a static IP” page.
Practical tips
- Install the dish with a clear view of the sky: obstructions cause short interruptions.
- Connect the camera to the Starlink router by cable where possible; on some kits this requires an Ethernet adapter.
- The upload speed of satellite internet is limited, so use the H.264 codec and a moderate bitrate. See recommended IP camera settings.
- On autonomous sites, provide stable power for the dish, router and camera.
Frequently asked questions
Start a stream over Starlink
Choose the method that suits you — RTMP Push, the software agent, Bridge or a ready-made camera — and show live video from anywhere in the world.
Open rtsp.meStarlink is a trademark of its respective owner. rtsp.me is not affiliated with the satellite internet provider.