Live cameras for recycling and collection points

A visual overview of container areas, entrances and production sites

rtsp.me brings together your existing IP cameras and opens the video in a browser on a computer, a smartphone or a tablet. An operator can see the overall queue, whether a zone is free and the visible situation at a remote site.

The cloud archive helps you work through the sequence of an intake or a loading run, and monitoring reports a loss of signal. Video complements weighbridge and material accounting, sensors and the work of your staff, but does not replace them.

Connect site cameras

Operational value

A wide shot shows the queue of vehicles, whether the unloading zone is free and how the site looks before a crew sets off. That helps an operator refine the task and get in touch with the site.

The archive can be matched against weighings, tickets and shift logs. An image cannot reliably establish the mass, composition, hazard class or legal status of a material.

Existing cameras

An accessible RTSP stream connects to rtsp.me without any obligation to replace your CCTV. H.264 and H.265 mean you can work with mainstream IP cameras.

Outdoors and in sorting halls, allow for dust, precipitation, vibration and swings in temperature. Do not place mounts and cables in the path of machinery or next to moving mechanisms.

What rtsp.me gives you

The main features for a network of sites:

Five steps to connect

Choose safe, informative fields of view and an access mode.

  1. Create an account at rtsp.me.
  2. Get the RTSP address of the camera you have chosen.
  3. Add the site, the zone and a clear name.
  4. Set up the archive, alerts, the password and the domain.
  5. Pass the link to your staff or embed the HTML player.
Site camera → RTSP → rtsp.me → operator / management / archive

Check the picture quality at working dust levels, and the plan for reacting to an alert.

Areas and use cases

The following wide shots are useful:

A public shot may show only an anonymized queue or whether the site is available.

Live stream from a collection point — example

A live wide shot of the site shows the queue at the entrance and how full the stockpiles are.

Live view of the intake area at a recycling pointLIVE

Intake area

The current load on the site and the entrance.

Managing the network

A single account helps an operator check remote points one after another and follow up on reports of an overflow or a queue. The decision to send a collection vehicle is taken with sensors, routes, contracts and staff judgement in mind.

Operational cameras at the sorting hall and the weighbridge stay private. For a public field of view that has been approved, you can use the HTML player with a domain restriction.

Archive and monitoring

The cloud archive shows the visible sequence of arrival, unloading and movement of material. Match the recording against the weighbridge system, the documents and the shift log.

rtsp.me reports a loss of the video stream. That does not mean the line has stopped, and it does not replace equipment monitoring.

Security and limitations

Do not point cameras at documents, screens, personal data or protected infrastructure. Installation takes account of the movement of forklifts, presses and conveyors, and archive access is restricted.

Video does not replace weighing equipment, fill-level sensors, material accounting, laboratory analyzis, fire and gas systems, guards, interlocks, protective equipment or staff. A shot cannot be used to establish a hazard class or to permit work in a hazardous zone.

Decisions about material, equipment and safety are taken from measurements, documents and regulations. Video provides an additional overview.

Frequently asked questions

Can I connect the site's existing cameras?
Yes. An IP camera with an accessible RTSP stream can be connected without replacing the local recorder. Equipment is chosen with dust, precipitation and temperature in mind.
Can I judge how full a container is from the video?
Only roughly, and only with a suitable field of view. Precise figures come from fill-level sensors, weighbridge records and checks by staff.
Does a camera replace the weighbridge and material accounting?
No. Video does not measure mass, composition or material grade. The sources of that data remain weighing equipment, documents, laboratory checks and your accounting system.
Can several collection points be combined?
Yes. Cameras at container areas, collection points and production sites can be gathered in a single account.
How do I protect operational fields of view?
Viewing is protected with a password, embedding is limited to an allowed domain, and archive access is granted only to the staff responsible.
What does video signal monitoring give me?
Monitoring notifies you when a stream becomes unavailable so that staff can check the power, the network and the camera. It does not track the state of the line or how full a container is.

Bring your recycling site cameras together

Connect the existing cameras at your collection points, container areas and production zones for viewing, an archive and signal oversight.

Get visual context across a distributed network while keeping weighbridge records, sensors, regulations and your staff as the basis for decisions.

Set up site cameras